Minimum effort. Maximum comfort.

Minimum effort. Maximum comfort.

Prior to your first use of the Clesana toilet the foil needs to be inserted correctly. Let's go!

Remove the lid and take out the cartridge

Press the rear flap inwards with one hand and lift off the lid unit with both hands. You can now remove the foil cartridge from the toilet.

Remove the lid and take out the cartridge

Press the rear flap inwards with one hand and lift off the lid unit with both hands. You can now remove the foil cartridge from the toilet.

Inserting the film

Place the foil liner over the cassette so that the arrows point downwards. Then align the foil on the cassette so that the arrows are positioned in the middle of the long side. Turn the cartridge over and pull the foil up about 10 cm so that the arrows point upwards.

Inserting the film

Place the foil liner over the cassette so that the arrows point downwards. Then align the foil on the cassette so that the arrows are positioned in the middle of the long side. Turn the cartridge over and pull the foil up about 10 cm so that the arrows point upwards.

Replace the foil cartridge

Put the cartridge back into the toilet (arrows pointing upwards) and make sure that no part of the film is trapped between the toilet and the cartridge. Pull the film further upwards until you see at least four visible folds. Then fold the film inwards and distribute the film evenly throughout the inside.

Replace the foil cartridge

Put the cartridge back into the toilet (arrows pointing upwards) and make sure that no part of the film is trapped between the toilet and the cartridge. Pull the film further upwards until you see at least four visible folds. Then fold the film inwards and distribute the film evenly throughout the inside.

Put the lid back on

Place the lid unit on the toilet by fixing it in the front area and then snapping it into the groove in the back of the toilet. Perform a "reset" by pressing the corresponding button for three seconds. The foil tube is sealed for the first time and the counter is reset (20 portions). The toilet is now ready for use!

Put the lid back on

Place the lid unit on the toilet by fixing it in the front area and then snapping it into the groove in the back of the toilet. Perform a "reset" by pressing the corresponding button for three seconds. The foil tube is sealed for the first time and the counter is reset (20 portions). The toilet is now ready for use!